Kingston SKC100S3B 480GB SSD Firmware Rev.332

SKC100S3/120G, SKC100S3B/120G, SKC100S3/120GBK

Last update 11 Dec. 2013 Licence Free OS Support Windows Downloads Total: 168 | Last week: 0 Ranking #12531 in Miscellaneous Publisher Kingston Technologies

Users rating:

Kingston SKC100S3B 480GB SSD Firmware Publisher's Description

Part Numbers:
- SKC100S3/120G, SKC100S3B/120G, SKC100S3/120GBK
- SKC100S3/240G, SKC100S3B/240G, SKC100S3/240GBK
- SKC100S3/480G, SKC100S3B/480G, SKC100S3/480GBK

Fixes:
- Fixed a rare condition when waking from slumber mode that might cause the drive to hang. This could result in a B.S.O.D. if the drive is the primary storage boot device.
- Fixed a rarely occurring issue during S3/4 cycling (sleep, hibernate modes) to handle marginal flash timing. This can cause a B.S.O.D. if the drive is the primary storage boot device.
- Fixed an issue during a firmware update where APM would be marked disabled in identify

Known Open Issues for SKC100S3, Firmware Rev. 332:
- Formatting a RAID-1 Volume takes longer than expected with PMC Sierra BRâ€8 HBA.
- Some platforms capable of supporting 6Gb SATA Drives from the chipset, but designed 3Gb SATA drives have poor signal integrity which can lead to occasional issues failure to wake from sleep, failure to negotiate at 6Gb speeds and dropped links.

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.